Vorfilter inkl. autom. Ableiter G14, 1416 l/min., IG 1/2" - 5

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

Vorfilter inkl. autom. Ableiter G14, 1416 l/min., IG 1/2" - 5

Svars: 
1 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT353345795
Bar kods: 
9004853126017
 212,96 € 
Ar PVN /
-+

Product Highlights

You will find more details about Quality compressed air filters here: Quality compressed air filters

Technical Facts

  • Options:- Differential pressure gauge- Differential pressure indicator- Wall mounting kit for simplified installation
  • * Reference conditions: Pressure 7 bar (102 psi), temperature 20°C. Maximum operating temperature 66°C, for series V: 35°C. Minimum operating temperature 1°C.

Substitute

This article could be an alternative for you:

Specifications

type
G14
rated capacity
1416 l/min
5
max. pressure
16 bar
Mounting thread
1/2 inches
Dimensions
70 x 24 x 231 mm
freespace for filter cartridges exchange
70 mm
Weight
0,6 kg

  • How clean is your compressed air?

    By nature, atmospheric air already contains various impurities such as dust, a variety of hydrocarbons and water in the form of humidity. When extracted by the compressor, they are compressed and discharged into the line together with oil particles from the compression process. These dirt particles interact and can form abrasive and corrosive emulsions that can damage downstream equipment. Quality treatment solutions remove these impurities from the compressed air.

  • Filters from MARK keep your compressed air network in perfect shape!

    At least one filter must be installed in each compressed air network. This improves air quality, which is beneficial for your entire compressed air network, including downstream dryers, air ducts and pneumatic tools. Depending on the application, you may need to filter the air in several stages to prevent saturation of the elements, maintain the air quality and avoid drops in pressure.

  • Pre-filter - filter range G

    Coalescing filters for general protection. Remove solid particles, liquid water and oil aerosol.Separation efficiency: 99%In order to achieve an optimum filter effect, a filter of type G should be preceded by a water separator. Illustration with differential pressure indicator option

  • Typical installations

    A. General protection(Air purity corresponds to ISO 8573-1: G filter class 3:-:3)B. General protection and reduced oil concentration(Air purity corresponds to ISO 8573-1: Class 1:-:2)C. High-quality compressed air with reduced dew point(Air purity corresponds to ISO 8573-1: Class 1:4:2)D. High-quality compressed air with reduced dew point and oil concentration(Air purity corresponds to ISO 8573-1: Class 1:4:1)1 Compressor with aftercooler and/or cyclone separator “WS”2 Pre-filter “G”3 Fine filter “C”4 Active carbon filter “V”5 MDX refrigeration dryer

  • Protect your compressed air installations against:

    - Moisture- Particles- Oil- Hydrocarbon- Viruses- Bacteria

  • Compressed air according to ISO 8573-1:2010

    Depending on the customer’s application, a certain level of air purity is required. These purity requirements have been classified into air purity classes. The purity classes are defined in the ISO 8573-1 standard, 2010 edition. This table defines seven air purity classes from 0 to 6 according to the following rule: the lower the class, the higher the air quality. The enclosures and elements are manufactured with high-quality components in accordance with ISO 12500-1.