DL-Schwingschleifer EPS 470 Teller 92x173x10 mm, 10 Loch, Hub 2,5 mm

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

DL-Schwingschleifer EPS 470 Teller 92x173x10 mm, 10 Loch, Hub 2,5 mm

Svars: 
1.1 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT974784875
Bar kods: 
9004853447501
371,47 €
Ar PVN /
-+

Product Highlights

You will find more details about Compressed air oscillating grinder here: Compressed air oscillating grinder

Technical Facts

  • Low stroke, therefore particularly suitable for fine grinding work
  • Ergonomic, non-slip composite handle
  • Grinding plate 93 x 180 mm
  • Hole form GL 17, 8 suction holes Ø 10 mm
  • Abrasive sheet fixation by clamp
  • Safety switch with automatic stop
  • Universally applicable for wood and metal
  • Connection for external dust extraction

Substitute

This article could be an alternative for you:

Specifications

Grinding surface
93x180 mm
rotational speed
10 rpm
Stroke height
2.5 mm
Operational pressure
6.3 bar
Air requirement
170 l/min
Air connection
4-Jan inches
Sound pressure level (1 m)
83,20 dB(A)
Length
240 mm
Weight
1.1 kg

  • ELMAG EPS

    The cutting-edge EPS models are highly ergonomic high-tech products for trade, commerce and industry, but also for private workshops and garages.

  • EPS technology

    Developed in the technical laboratory under realistic conditions, EPS compressed air tools are characterised by their outstanding technical perfection.Tight manufacturing tolerances, self-centring, precision ground air motors and high-precision quality bearings from leading brand manufacturers ensure smoother running, optimised air consumption and maximum product performance.

  • EPS safety

    Compressed air tools are the safest power tools. They are generally much safer than electric power tools and are also more ergonomic. Without an electric motor, a more manageable and user-friendly design is possible and there is no danger from electricity or explosions, which is a significant advantage. In addition, compressed air tools are safe to use even in wet environments.

  • Maintenance and operation

    Made for continuous loads under the toughest conditions, CA tools require minimal care. Provided that clean and dry (condensate-free) compressed air is used as the drive medium. Water residues cause corrosion and damage to the air motor and components. Compressed air prepared by a refrigerant dryer and filter.And another thing - compressed air must be oiled! The easiest way is to use maintenance units, automatic oilers or inline oilers. It is also advisable to add a few drops of ELMAG oil directly into the air connection opening before and after each working day or before longer work breaks.

  • Compressed air hose length

    The longer the compressed air hose, the lower the available operating pressure. For a 10 metre long compressed air hose with an internal diameter of 10 millimetres, the pressure loss is about 1.4 bar.The operating pressure must therefore be set correspondingly higher on the compressor using the pressure regulator.Selection adviceWe recommend limiting the hose length to a maximum of 10 metres and choosing an internal hose diameter of 10 millimetres.