SET-Aktion bestehend aus: KBM 16 TN Maschinenschraubstock 4" / 100 mm, Spannschrauben 16mm, HSS-Bohrerkassette 1-13mm 25tlg.

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

SET-Aktion bestehend aus: KBM 16 TN Maschinenschraubstock 4" / 100 mm, Spannschrauben 16mm, HSS-Bohrerkassette 1-13mm 25tlg.

Svars: 
65.9 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT1415950258
Bar kods: 
9004853160318
 836,11 € 
Ar PVN /
-+

Product Highlights

You will find more details about Bench drills and column drills - KBM Series here: Bench drills and column drills - KBM Series

Substitute

This article could be an alternative for you:

Specifications

drilling capacity in steel
16 mm
mandrel holding fixture (screw mandrel)
MK 2
speed range
100 - 2,000 rpm
speed gradually
12
quill stroke
80 mm
column diameter
73 mm
t-slot width
16 mm
drill table lift
360 mm
mandrel radius
195 mm
drill table swiveling
± 45 °
drill table revolving
± 180 °
quill distance table min./max.
110 - 470 mm
drilling table surface
300 x 310 mm
motor power
550 W
mains connection
400 / 50 - 60 V/Hz
cubature
300 x 310 x 680 mm
base plate surface
285 x 495 mm
height (total)
1.07 mm
Weight
56 kg

  • Compact professional table drilling machines

    The compact KBM 13 TN, 16 TN and 25 TN bench drills feature a proven drive system with a powerful high-quality motor and belt drive. High concentricity is achieved by using precision bearings.With a drilling capacity in steel of 13, 16 or 25 mm, these models are ideal for ambitious model makers and hobby craftspeople - and for all those who appreciate a professionally equipped workshop.Clockwise/anticlockwise rotation. Tip: top price for the set offer.

  • This is how professionals drill

    1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.

  • Serienausstattung

    - Schnellspannbohrfutter B 16. 1 - 16mm- Kegeldorn MK 2 / B 16- Austreibkeil- Werkzeugsatz- Bedienungsanleitung / CE

  • Set-Ausstattung

    - KBM 16 TN- Maschinenschraubstock 5' / 120 mm- 2 Spannschrauben 16 mm- HSS-Bohrerkassette 1 - 13 mm 25-tlg.