Keilriemen-Tischbohrmaschine Modell KBM 16 T VARIO 230V, RE-Lauf

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

Keilriemen-Tischbohrmaschine Modell KBM 16 T VARIO 230V, RE-Lauf

Svars: 
42 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT1966159590
Bar kods: 
9004853160264
 655,82 € 
Ar PVN /
-+

Product Highlights

You will find more details about Bench drills and column drills - KBM Series here: Bench drills and column drills - KBM Series

Technical Facts

  • Operating lever for speed setting
  • Speed adjustment by means of variator disc
  • Telescopic drill chuck protection CE
  • LED light integrated into drilling head
  • Clockwise rotation
  • Incl. laser drilling indicator

Substitute

This article could be an alternative for you:

Specifications

drilling capacity in steel
16 mm
mandrel holding fixture (screw mandrel)
MK 2
speed range
340 - 2,200 rpm
speed gradually
continuously variable
quill stroke
90 mm
column diameter
60 mm
t-slot width
14 mm
drill table lift
275 mm
mandrel radius
150 mm
drill table swiveling
± 45 °
drill table revolving
± 180°
quill distance table min./max.
360 mm
drilling table surface
243 x 243 mm
motor power
550 W
mains connection
230/50-60 V/Hz
cubature
195x195x360 mm
base plate surface
250 x 415 mm
height (total)
910 mm
Weight
42 kg

  • Super slim professional column drill 550 W

    With a quill spacing of 360 mm from the drilling bench, the KBM 16 T Vario allows machining of tall workpieces and finished welded components. Clamping grooves in the base plateexpand the space for tall moulded parts.

  • This is how professionals drill

    1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.

  • Serienausstattung

    - Schnellspannbohrfutter B 16, 1 - 16 mm- Kegeldorn MK 2 / B 16- Austreibkeil- Werkzeugsatz- Bedienungsanleitung / CE