Getriebe Fräs- und Bohrmaschine Modell MFB 45 TGV

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

Getriebe Fräs- und Bohrmaschine Modell MFB 45 TGV

Svars: 
278 kg
Pieejamība: 
Uz pasūtījuma
Zīmols: 
ELMAG
Preces kods:
DT1293760231
Bar kods: 
9004853821004
 4 664,55 € 
Ar PVN /
-+

Product Highlights

You will find more details about Gear milling machines and drills - MFB Series here: Gear milling machines and drills - MFB Series

Technical Facts

  • Milling capacity Ø 80 / 32 mm
  • Cubature 820 x 240 x 475 mm
  • Spindle projection 260 mm
  • Table travel 455 x 180 mm
  • Pivoting milling head ± 90°
  • Drive motor 2-stage 1,100 W / 850 W, 400 V
  • Durable quality gearbox, 12 speeds 75 - 3,200 rpm
  • Right and left rotation
  • Operating mode drilling/milling and thread cutting
  • Automatic sleeve feed 3-stage 0.10 / 0.18 / 0.28 mm/U
  • Precision microfeed
  • Milling spindle with precision bearing
  • Drilling depth scale and stop
  • Smooth-running, precise cross table with T-slots and coolant channel
  • Emergency stop button / zero voltage release
  • Milling spindle protection cover
  • Drilling depth scale
  • Emergency stop button / zero voltage release
  • Machine stand optionally available
  • Quick-action drill chuck B18, 1 - 16 mm
  • Taper mandrel MK 4 / B 16, IG M16
  • Reducing sleeve MK 4 / MK 3
  • Reducing sleeve MK 4 / MK 2
  • Tightening spindle M16
  • Tool kit
  • Operating instructions / CE

Substitute

This article could be an alternative for you:

Specifications

drilling capacity in steel
45 mm
thread cutting performance
M20
face mills milling capacity
80 mm
end mills milling capacity
32 mm
mandrel holding fixture (screw mandrel)
MK 4
rotational speed 1
75 - 1,600 rpm
rotational speed 2
150 - 3,200 rpm
speed gradually
12
quill stroke
120 mm
column diameter
- mm
t-slot width
14 mm
milling head stroke
450 mm
mandrel radius
260 mm
milling head swivel range
± 90 °
quill distance table min./max.
25 - 475 mm
quill distance socket
- mm
quill feed
0,10/0,18/0,28 mm/rev
router table surface
800 x 240 mm
quill feed levels
3
table length X x Y
455 x 180 mm
router table stroke
- mm
motor power
(2-stage) 1,100 / 850 W
coolant pump
- W
mains connection
400 / 50 - 60 V/Hz
cubature
820 x 240 x 475 mm
length x width
1,300 x 1,000 mm
Height
1.5 mm
Weight
278 kg

  • High-Speed-Table Milling Machine 1.100 / 850 WThe

    MFB 45 TGV enables comprehensive machining of smallto medium-sized workpieces by face and shaft milling, drilling, countersinking,reaming and thread cutting. In addition to a face milling performance of 80 mm, a peak speed of 3,200 rpm for small bores is noticeable - eventhe use of grinding tools is possible.The ergonomically designed MFB 45 TGV is equipped with three pinfeed stages and a thread cutting mode.A universally applicable machine for flexible order processing.