Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

COLLET CHUCKS HSK "E" Cono=HSK-50E;D=50;D1=50;Ghiera=Z091.001.R;Pinze=Ø 2÷20;Rotazione=Dx;A=100

Pieejamība:

Uz pasūtījuma

Zīmols:

SISTEMI Klein

Preces kods:

DT686215608

Ražotāja preces kods:

T118.998.R

282,20 €

Ar PVN /

Supplied with nut (without collet)
For the spring collets see our item T119 - T125; for the clamping nuts see our item Z091 (without ball bearing nut) and/or Z091 (with ball bearing nut); for the wrenches see our item Z052 (standard) and/or Z052 (torque).
To be used with our tightening stand item T139
Threaded nut DIN 6499
Balanced to 25.000 RPM at G2,5 (HSK40E - HSK50E)
These tool holders ensure a maximum error of concentricity between the conical part and the tool's seat of 0.003mm (Runout: 0.0001")
The "A" measure will be determined with clamped tool shanks by using both our spring collets DIN6499. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
The hollow taper shank is produced according to DIN69893 for inserting the Balluff microchip
Items Art. T118.990.R (HSK25E) and Art. T118.992.R (HSK32E) are balanced to 40.000 RPM at G2,5 for "Multicam®" machines
Item T118.995.R for "SD-ITALY" machines

Item	Taper	A	D	D1	Spring collets	Clamping nut	Rotation
T118.990.R	HSK-25E	40	22	25	Ø 2÷10 (Art. T127/ER16)	Z091.405.R Mini	Rh
T118.991.R	HSK-32E	60	35	32	Ø 1÷13 (Art. T126/ER20)	Z091.104.R	Rh
T118.992.R	HSK-32E	60	42	32	Ø 2÷16 (Art. T125/ER25)	Z091.103.R	Rh
T118.993.R	HSK-40E	70	35	40	Ø 2÷16 (Art. T125/ER25)	Z091.403.R Mini	Rh
T118.995.R	HSK-40E	70	50	40	Ø 2÷20 (Art. T119/ER32)	Z091.001.R	DX
T118.997.R	HSK-50E	80	42	50	Ø 2÷16 (Art. T125/ER25)	Z091.103.R	Rh
T118.998.R	HSK-50E	100	50	50	Ø 2÷20 (Art. T119/ER32)	Z091.001.R	Rh