Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

COLLET CHUCKS HSK-50F Cono=HSK-50F;D=50;D1=50;Ghiera=Z091.001.R;Pinze=Ø 2÷20;Rotazione=DX;A=73

Pieejamība:

Uz pasūtījuma

Zīmols:

SISTEMI Klein

Preces kods:

DT1787686736

Ražotāja preces kods:

T118.966.R

249,95 €

Ar PVN /

Supplied with nut (without collet)
Balanced to 24000 RPM
Threaded nut DIN 6499 (ER32 - ER40)
Threaded nut DIN 6388 (EOC25/SYOZ25/RDO35)
For the spring collets see our item T119 - T123 - T124 - T125; for the clamping nuts see our item Z091 (without ball bearing nut) and/or Z091 (with ball bearing nut); for the wrenches see our item Z052 (standard) and/or Z052 (torque).
To be used on our adjustable demount device Klein® T139
These tool holders ensure a maximum error of concentricity between the conical part and the tool's seat of 0.003mm (Runout: 0.0001")
The "A" measure will be determined with clamped tool shanks by using both our spring collets DIN6499. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
The hollow taper shank is produced according to DIN69893 for inserting the Balluff microchip.
The ball bearing clamping nut improves the clamping precision thanks to a homogeneous clamping force. It can be used both for the right-hand and left-hand rotation.

Item	Taper	A	D	D1	Spring collets	Clamping nut	Rotation
T118.962.R	HSK-50F	60	42	50	Ø 2÷16 (Art. T125/ER25)	Z091.103.R	Rh
T118.966.R	HSK-50F	73	50	50	Ø 2÷20 (Art. T119/ER32)	Z091.001.R	RH
T118.968.R	HSK50-F	76	63	50	Ø 2÷20 (Art. T119/ER32)	Z091.101.R w/ball bearing nut	DX
T118.970.R	HSK-50F	76	63	50	Ø 2÷30 (Art. T123/ER40)	Z091.002.R	Rh
T118.972.R	HSK-50F	78	63	50	Ø 2÷30 (Art. T123/ER40)	Z091.102.R w/ball bearing nut	Rh
T118.974.R	HSK-50F	78	60	50	Ø 2÷26 (Art. T124/EOC25)	Z091.203.R	RH