SET-Aktion bestehend aus: KBM 25 SN Maschinenschraubstock 4" / 100mm, Spannschrauben 16mm, HSS-Bohrerkassette 9-tlg.14,5-30mm

Товар может отличаться от изображенного на картинке. На изображении могут быть детали, которые не входят в комплектацию товара.

SET-Aktion bestehend aus: KBM 25 SN Maschinenschraubstock 4" / 100mm, Spannschrauben 16mm, HSS-Bohrerkassette 9-tlg.14,5-30mm

Svars: 
105 kg
Наличие: 
Пред-заказ
Бренд: 
ELMAG
Код товара:
DT204521927
Bar kods: 
9004853160332
 1 138,61 € 
С НДС /
-+

Product Highlights

You will find more details about Bench drills and column drills - KBM Series here: Bench drills and column drills - KBM Series

Substitute

This article could be an alternative for you:

Specifications

drilling capacity in steel
25 mm
mandrel holding fixture (screw mandrel)
MK 3
speed range
100 - 2,000 rpm
speed gradually
16
quill stroke
80 mm
column diameter
80 mm
t-slot width
16 mm
drill table lift
655 mm
mandrel radius
213 mm
drill table swiveling
± 45 °
drill table revolving
± 180 °
quill distance table min./max.
60 - 715 mm
drilling table surface
350 x 335 mm
motor power
1.1 W
mains connection
400 / 50 - 60 V/Hz
cubature
350 x 355 x 715 mm
base plate surface
270 x 480 mm
height (total)
1.63 mm
Weight
86 kg

  • Super slim professional column drill 1.100 W

    With a maximum quill spacing of 715 mm from the drilling bench, the KBM 25 SN allows machining of tall workpieces and finished welded components. Clamping grooves in the base plate increase the clearance for high moulded parts.The machine is therefore excellent for repairs in agriculture and for frame construction in metalworking companies. Its solid design and good standard equipment are its distinguishing features.Clockwise/anticlockwise rotation.

  • This is how professionals drill

    1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.

  • Serienausstattung

    - Schnellspannbohrfutter B 16, 1 - 16 mm- Kegeldorn MK 3 / B 16- Austreibkeil- Werkzeugsatz- Bedienungsanleitung / CE

  • Set-Ausstattung

    - KBM 25 SN- Maschinenschraubstock 5' / 120 mm- 2 Spannschrauben 16 mm- HSS-Bohrerkassette 14,5 -30 mm 9-tlg.