SET-Aktion bestehend aus: KBM 13 TN Schraubstock 3" / 75 mm, Spannschrauben 16mm, HSS-Bohrerkassette 1-13mm 25-tlg.

Товар может отличаться от изображенного на картинке. На изображении могут быть детали, которые не входят в комплектацию товара.

SET-Aktion bestehend aus: KBM 13 TN Schraubstock 3" / 75 mm, Spannschrauben 16mm, HSS-Bohrerkassette 1-13mm 25-tlg.

Svars: 
40 kg
Наличие: 
Пред-заказ
Бренд: 
ELMAG
Код товара:
DT2091551853
Bar kods: 
9004853160301
 624,36 € 
С НДС /
-+

Product Highlights

You will find more details about Bench drills and column drills - KBM Series here: Bench drills and column drills - KBM Series

Substitute

This article could be an alternative for you:

Specifications

drilling capacity in steel
13 mm
mandrel holding fixture (screw mandrel)
MK 2
speed range
500 - 2500 rpm
speed gradually
5
quill stroke
60 mm
column diameter
60 mm
t-slot width
16 mm
drill table lift
230 mm
mandrel radius
127 mm
drill table swiveling
± 45 °
drill table revolving
± 180 °
quill distance table min./max.
60 - 290 mm
drilling table surface
197 x 197 mm
motor power
550 W
mains connection
230 / 50 - 60 V/Hz
cubature
197 x 197 x 290 mm
base plate surface
210 x 340 mm
height (total)
850 mm
Weight
30 kg

  • Compact professional bench drills

    The KBM 13 TN, 16 TN and 25 TN compact benchdrills have a proven drive system with a powerful, high-quality motor and belt drive. Precision bearings provide high concentricity.With a 13, 16 or 25 mm steel drilling performance, thesemodels are well suited for ambitious model makers, hobbyists- and anyone who appreciates a professionally equipped workshop. Tip: Set offers the ideal price.

  • This is how professionals drill

    1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.

  • Serienausstattung

    - Schnellspannbohrfutter B 16. 1 - 13 mm- Kegeldorn MK 2 / B 16- Austreibkeil- Werkzeugsatz- Bedienungsanleitung / CE

  • Set-Ausstattung

    - KBM 13 TN- Maschinenschraubstock 3' / 75 mm- 2 Spannschrauben 16 mm- HSS-Bohrerkassette 1 - 13 mm 25-tlg.