Universal-Drehmaschine INDUSTRIE 1500/250 inkl. "SINO"

Товар может отличаться от изображенного на картинке. На изображении могут быть детали, которые не входят в комплектацию товара.

Universal-Drehmaschine INDUSTRIE 1500/250 inkl. "SINO"

Svars: 
1830 kg
Наличие: 
Пред-заказ
Бренд: 
ELMAG
Код товара:
DT1527563152
Bar kods: 
9004853881565
 25 966,60 € 
С НДС /
-+

Product Highlights

You will find more details about Universal lathes - INDUSTRIE series here: Universal lathes - INDUSTRIE series

Substitute

This article could be an alternative for you:

Specifications

Tip width
1.5 mm
Tip height
250 mm
turning diameter over bed
500 mm
turning diameter over carriage
325 mm
turning diameter without bridge
630 mm
machine bed width
330 mm
bridge length
260 mm
cross slide way
300 mm
top slide way
130 mm
turning chisel cross-section, max.
25 x 25 mm
rotating feed intake
D1 - 6
mandrel holding fixture (screw mandrel)
MK 5
spindle bore
65 mm
rotational speed
22 - 1,800 rpm
speed gradually
15
longitudinal feed
(66) 0,072-4,038 mm/rev
cross feed rates
(66) 0,036-2,019 mm/rev
Thread size metric (M..)
(66) 0.5 - 28 mm
module thread metric
(33) 0.5 - 3.5 mm
inch thread, gears G
(66) 1 - 56 G/'
inch module thread, Gears G
(33) 8 - 56 G/'
lead screw gradient
6 mm
lead screw diamteter
35 mm
sleeve holding fixture
MK 5
quill diameter
65 mm
spindle stroke
120 mm
motor power
5.5 W
rapid traverse drive
120 W
coolant pump
125 W
mains connection
400 / 50 - 60 V/Hz
length (total)
2.95 mm
width (total)
1.150 mm
height (total)
1.8 mm
Weight
1.83 kg

  • Extra heavy-duty centre lathes, 5,500 watts

    With impressive performance data and optimum features, theproven INDUSTRIE 250 models are among the favourites oflathe specialist and toolmakers.The ideal design with self-centring spindle, a powerful 5,500 wattdrive motor and an extremely solid tailstock enable turning sizes via carriages of Ø 325 x 1,000, 1,500 or 2,000 mm.Maximum turning diameter is 500 mm, without bridge 630 mm. Aspindle bore of Ø 65 mm accommodates 2 inch rod material(60.3 mm). The INDUSTRIE 250 models are very well suited forseries production. They are the first in their class to have an electromechanicalfoot brake for a very fast lathe spindle stop.An adjustable friction clutch on the tool carriage protectsthe spindles against overload. An adjustable longitudinal stopensures a precise feed stop and protects against chuck collision.A coolant tank with pump is integrated in the machine base.Thanks to the standard equipment with a quick-changetool holder set for fast tool changes and a digital positionindicator from SINO, the Industrie 250 models are idealfor efficient serial production of precision parts.The INDUSTRIE 2000/250 model is equipped with an input drive and, with a tool carriage speed of 5 m/min,it significantly reduces non-productive time.

  • Standard features

    - SINO SDS6-3V digital position display- RÖHM three-jaw chuck Ø 250 mm- Four-jaw face plate chuck Ø 315 mm- Clamping disc Ø 435 mm- 2 centring points, fixed- Rotating centre point MK 5- Travelling rest- Steady rest- Quick-change steel holder set, 5-piece MB- Threaded gauge- Halogen machine lamp- Emergency stop button/zero-voltage release- Chuck protection with safety switch- Base frame / chip tray / splashboard- Tool set / operating instructions / CE

  • Special accessories

    - Turning table lathe tool set 25 x 25 mm, 7-piece- Turning table set, 7-piece for lathe tool set 25 x 25 mm- 'Camlock' lathe tool set 25 x 25 mm, 7 -piece- Groove tool 25 x 25 mm, length 150 mm- Blade for groove tool 25 x 25 mm