PORTAUTENSILI CONO HSK FORMA "E" Cono=HSK-32E;D=42;D1=32;Ghiera=Z091.103.R;Pinze=Ø 2÷16;Rotazione=Dx;A=60

Товар может отличаться от изображенного на картинке. На изображении могут быть детали, которые не входят в комплектацию товара.

PORTAUTENSILI CONO HSK FORMA "E" Cono=HSK-32E;D=42;D1=32;Ghiera=Z091.103.R;Pinze=Ø 2÷16;Rotazione=Dx;A=60

Наличие: 
Пред-заказ
Бренд: 
SISTEMI Klein
Код товара:
DT562919985
Ražotāja preces kods: 
T118.992.R
 261,28 € 
С НДС /
-+
  • Supplied with nut (without collet)
  • For the spring collets see our item T119 - T125; for the clamping nuts see our item Z091 (without ball bearing nut) and/or Z091 (with ball bearing nut); for the wrenches see our item Z052 (standard) and/or Z052 (torque).
  • To be used with our tightening stand item T139
  • Threaded nut DIN 6499
  • Balanced to 25.000 RPM at G2,5 (HSK40E - HSK50E)
  • These tool holders ensure a maximum error of concentricity between the conical part and the tool's seat of 0.003mm (Runout: 0.0001")
  • The "A" measure will be determined with clamped tool shanks by using both our spring collets DIN6499. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
  • The hollow taper shank is produced according to DIN69893 for inserting the Balluff microchip
  • Items Art. T118.990.R (HSK25E) and Art. T118.992.R (HSK32E) are balanced to 40.000 RPM at G2,5 for "Multicam®" machines
  • Item T118.995.R for "SD-ITALY" machines

Features and product variants

Item Taper A D D1 Spring collets Clamping nut Rotation
T118.990.R HSK-25E 40 22 25 Ø 2÷10 (Art. T127/ER16) Z091.405.R Mini Rh
T118.991.R HSK-32E 60 35 32 Ø 1÷13 (Art. T126/ER20) Z091.104.R Rh
T118.992.R HSK-32E 60 42 32 Ø 2÷16 (Art. T125/ER25) Z091.103.R Rh
T118.993.R HSK-40E 70 35 40 Ø 2÷16 (Art. T125/ER25) Z091.403.R Mini Rh
T118.995.R HSK-40E 70 50 40 Ø 2÷20 (Art. T119/ER32) Z091.001.R DX
T118.997.R HSK-50E 80 42 50 Ø 2÷16 (Art. T125/ER25) Z091.103.R Rh
T118.998.R HSK-50E 100 50 50 Ø 2÷20 (Art. T119/ER32) Z091.001.R Rh