COLLET CHUCKS HSK-50F Cono=HSK-50F;D=63;D1=50;Ghiera=Z091.102.R c/cuscinetto;Pinze=Ø 2÷30;Rotazione=Dx;A=78

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

COLLET CHUCKS HSK-50F Cono=HSK-50F;D=63;D1=50;Ghiera=Z091.102.R c/cuscinetto;Pinze=Ø 2÷30;Rotazione=Dx;A=78

Availability: 
Pre-order
Ražotājs: 
SISTEMI Klein
Product SKU:
DT850578691
Ražotāja preces kods: 
T118.972.R
 306,42 € 
incl. VAT /
-+
  • Supplied with nut (without collet)
  • Balanced to 24000 RPM
  • Threaded nut DIN 6499 (ER32 - ER40)
  • Threaded nut DIN 6388 (EOC25/SYOZ25/RDO35)
  • For the spring collets see our item T119 - T123 - T124 - T125; for the clamping nuts see our item Z091 (without ball bearing nut) and/or Z091 (with ball bearing nut); for the wrenches see our item Z052 (standard) and/or Z052 (torque).
  • To be used on our adjustable demount device Klein® T139
  • These tool holders ensure a maximum error of concentricity between the conical part and the tool's seat of 0.003mm (Runout: 0.0001")
  • The "A" measure will be determined with clamped tool shanks by using both our spring collets DIN6499. The "A" measure may be subject to variations depending on the diameter of the clamped tools.
  • The hollow taper shank is produced according to DIN69893 for inserting the Balluff microchip.
  • The ball bearing clamping nut improves the clamping precision thanks to a homogeneous clamping force. It can be used both for the right-hand and left-hand rotation.

Features and product variants

Item Taper A D D1 Spring collets Clamping nut Rotation
T118.962.R HSK-50F 60 42 50 Ø 2÷16 (Art. T125/ER25) Z091.103.R Rh
T118.966.R HSK-50F 73 50 50 Ø 2÷20 (Art. T119/ER32) Z091.001.R RH
T118.968.R HSK50-F 76 63 50 Ø 2÷20 (Art. T119/ER32) Z091.101.R w/ball bearing nut DX
T118.970.R HSK-50F 76 63 50 Ø 2÷30 (Art. T123/ER40) Z091.002.R Rh
T118.972.R HSK-50F 78 63 50 Ø 2÷30 (Art. T123/ER40) Z091.102.R w/ball bearing nut Rh
T118.974.R HSK-50F 78 60 50 Ø 2÷26 (Art. T124/EOC25) Z091.203.R RH