CUTTING CAPACITY

0°	255	250	300 x 220
< 45°	160	160	150 x 170
45° >	200	190	190 x 170
60° >	110	110	110 x 130

Manual horizontal bandsaw for medium sized ferrous material.
Double miter cutting (45° left and from 0° to 60° right).
Two cutting speeds.
Blade rotation start switch with maintainded action on the sawframe grip.
Control pannel setted on a fixed arm support.
Coolant liquid with electropump and crucible.
Blade tension by hand wheel and safety microswitch in case of blade breakage or insufficent blade tension.
Pedestal in steel plate.

Manual cutting cycle
Vice locking of material to cut. The saw band runs as long as the operator holds the gripswitch on the sawframe lever. Manual pull down and rise of the sawframe.

TECHNICAL FEATURES AND CUTTING CAPACITY
Cast-iron sawframe on twin tapered bearings and ring nut to provide greater stability and vibration free cutting.
Mechanical blade tension with handwheel.
Vice with quick lock lever.
Precision blade guide with tungsten carbide pads and adjustable rollers.
Anti-corrosion treatment with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision.
Electric installation according CE regulations.
Set of fuses against current overload.
Motor protected thermal feeler. Safety microswitch on the blade protection. 
Severe tests on mechanical tolerances, electric installation and final performance test.

STANDARD EQUIPMENT
Set of service spanners.
Bar stop rod with millimiter scale.
Material support.
Bi-metal sawband 2750x27x0,9.
Certificate of conformity and instruction manual according to Machine Directive 2006/42/CE.

ACCESSORIES
Rollerway on loading side 2 mt
Rollerway on unloading side 2 mt with bar stop
D.A. (Automatic Downfeed) Automatic pull down with sawframe gravity downfeed controlled by hydraulic cylinder with adjustable speed.

TECHNICAL SUPPORT
Technical support from the local service centre.
Thomas spare parts supply.