Universal Dreh- und Fräskombination SUPERTURN 700/140 mit MFB 20 Vario

Prece var atšķirties no attēlā parādītās. Attēlā var būt parādītas detaļas, kuras neietilpst piegādes komplektā.

Universal Dreh- und Fräskombination SUPERTURN 700/140 mit MFB 20 Vario

Svars: 
60 kg
Availability: 
Pre-order
Ražotājs: 
ELMAG
Product SKU:
DT1952904029
Bar kods: 
9004853881145
 5 717,25 € 
incl. VAT /
-+

Product Highlights

You will find more details about Universal lathes - SUPERTURN series here: Universal lathes - SUPERTURN series

Substitute

This article could be an alternative for you:

Specifications

Tip width
700 mm
turning diameter over bed
280 mm
turning diameter over carriage
165 mm
machine bed width
180 mm
cross slide way
140 mm
top slide way
70 mm
turning chisel cross-section, max.
12 x 12 mm
mandrel holding fixture (screw mandrel)
MK 4
spindle bore
26 mm
rotational speed 1, stepless (Superturn)
50 - 1,250 rpm
rotational speed 2, stepless (Superturn)
100 - 2,500 rpm
longitudinal feed
0.07 - 0.20 mm/rev
Thread size metric (M..)
0.4 - 3.5 mm
inch thread, gears G
Aug-56 G/'
sleeve holding fixture
MK 2
quill diameter
30 mm
spindle stroke
80 mm
engine power (Superturn)
1.000 W
mains connection (Superturn)
230 / 50~60 V/Hz
Length
1.4 mm
Width
700 mm
Height
600 mm
weight (Superturn)
190 kg
drilling capacity in steel
20 mm
thread cutting performance
M14
face mills milling capacity
63 mm
end mills milling capacity
16 mm
mandrel holding fixture (milling spindle)
MK 2
mandrel radius
184 mm
quill stroke
50 mm
milling head stroke
380 mm
milling head swivel range
± 90 °
rotational speed 1, stepless (MFB)
50 - 1,125 rpm
rotational speed 2, stepless (MFB)
100 - 2,250 rpm
engine power (MFB)
600 W
mains connection (MFB)
230 / 50~60 V/Hz
height from machine bed
830 mm
weight (MFB)
60 kg

  • Superturn + MFB 20 Vario - Set-

    Universal turning machine SUPERTURN 700/140 Vario- Milling, boring and drilling unit MFB 20 Vario

  • Standard features

    Digital speeddisplay - Three-jaw lathe chuck Ø 125 mm, centre- Centre point MK 4- Centre point MK 2- Emergency stop button / Zerovoltage release - Lathe chuck protection with safety switch- Chip trough / Splashboard - Tool box / Operating instructions / CE- Quick clamping drill chuck B 16 / 1 - 16 mm- Taper mandrel MK 2 / B 16 with IG M10- Pull spindle M10

  • Special accessories

    - Four-jaw lathe chuck Ø 125 mm, individual clamping - Flange Ø 125 mm for SUPERTURN 700/140 Vario - Face plate Ø 240 mm for SUPERTURN 700/140 Vario - Revolving centre MK 2 - Travelling rest for SUPERTURN 700/140 Vario - Fixed rest for SUPERTURN 700/140 Vario - Quick-change steel holder set MA, 5 piece - Turning steel set 12 x 12 mm ISO, 5-piece - Turning steel set 12 x 12 mm ISO, 11-piece - Indexable insert turning set 12 x 12 mm, 7-piece - Indexable insert set, 7-piece for turning set 12 x 12 mm - “Camlock” turning tool set 12 x 12 mm, 7-piece - SUPERTURN 700/140 Vario subframe - Base plate for MFB 20 Vario with XY table - Titanium milling set, 20 piece, Ø 3 - 20 mm - Machine vice 3” / 75 mm - Collet set MK 2 (ER 25), 10-piece, 2 - 16 mm - Collet set MK 2 (ER40), 15-piece, 2-26 mm