Horizontal double mitre bandsaw SUPER TRAD 380 MULTI MODE
Horizontal double mitre bandsaw SUPER TRAD 380 MULTI MODE
CUTTING CAPACITY
0° | 300 | 260 | 330 x 260 |
45° R | 260 | 250 | 270 x 200 |
45° L | 220 | 180 | 200 x 160 |
60° R | 180 | 170 | 170 x 170 |
Two ways miter cutting (from 45° left to 60° right).
Multi-function metal bandsawing machine with sawframe gravity down-feed controlled by hydraulic cylinder.
The Multi-Mode version provides three functions:
-Automatic sawframe downfeed with quick approach of the blade to the material being cut.
-Manual sawframe downfeed with constant feed rate.
-Manual sawframe downfeed with free feed rate.
Round cutting table (plateu) providing precision mitering, yet preventing the sawband to scratch its surface as the cut is completed.
Protection against chips obtrusion and rust seizure. Precision blade guides with hard metal pads and adjustable bearings.
Two cutting speeds.
TECHNICAL FEATURES
Vice and sawframe in cast iron to provide high stability and vibration free cutting.
Precision blade guides with hard metal pads and adjustable bearings.
Bench and pedestal in steel plate.
Reduction unit with grears in oil-bath.
Anti-corrosion treatment with electrolytic nickel-plating and galvanization zinc plating ensure long lasting cutting precision.
Electric installation according CE regulations.
Control pannel setted on a fixed arm support.
Set of fuses against current overload.
Motor protected thermal feeler. Safety microswitch on the blade protection.
Severe tests on mechanical tolerances, electric installation and final performance test.
STANDARD EQUIPMENT
Set of service spanners.
Bar stop.
Material support.
Bi-metal sawband 3310x27x0,9.
Certificate of conformity and instruction manual according to Machine Directive 2006/42/CE
ACCESSORIES
Blade lubricant nebulizer.
Rollerway on loading side 2 mt
Rollerway on unloading side 2 mt with bar stop
TECHNICAL SUPPORT
Technical support from the local service center.
Thomas spare parts supply.
TECHNICAL DATA
3Ph Electric motor |
kW |
1.5 - 1.8 |
Electropump |
kW |
0.05 |
Gearbox reduction ration |
I |
40/1 |
Flywheel diameter |
mm |
355 |
Blade dimension |
mm |
3310 x 27 x 0,9 |
Cutting speed |
m/1' |
40/80 |
Vice opening |
mm |
340 |
Sawframe inclination |
° |
30 |
Working table height |
mm |
940 |
Machine dimension |
mm |
1700 x 2150 0x 2250 |
Weight |
kg |
660 |