Keilriemen-Säulenbohrmaschine Modell KBM 25 S VARIO
Keilriemen-Säulenbohrmaschine Modell KBM 25 S VARIO
Keilriemen-Säulenbohrmaschine Modell KBM 25 S VARIO
Svars:
95 kg
Availability:
Pre-order
Ražotājs:
ELMAG
Product SKU:
DT81750616 1 409,65 €
incl. VAT /
Product Highlights
You will find more details about Bench drills and column drills - KBM Series here: Bench drills and column drills - KBM SeriesTechnical Facts
- Operating lever for speed setting
- Speed adjustment by means of variator disc
- Telescopic drill chuck protection CE
- LED lamp mounted on the side
- Right/left rotation
Substitute
This article could be an alternative for you:Specifications
drilling capacity in steel
25 mm
mandrel holding fixture (screw mandrel)
MK 3
speed range
440 - 2.200 rpm
speed gradually
continuously variable
quill stroke
150 mm
column diameter
80 mm
t-slot width
14 mm
drill table lift
475 mm
mandrel radius
215 mm
drill table swiveling
± 45 °
drill table revolving
± 180 °
quill distance table min./max.
365 mm
drilling table surface
356 x 356 mm
motor power
1.500 W
mains connection
400/50-60 V/Hz
cubature
285x285x635 mm
base plate surface
420 x 580 mm
height (total)
1.82 mm
Weight
95 kg
Super slim professional pillar drill 1,500 W
With a quill spacing of 365 mm from the drilling bench, the KBM 25 S Vario allows machining of tall workpieces and finished welded components. Clamping grooves in the base plateexpand the space for tall moulded parts.This is how professionals drill
1. Drill selection: For metals: Use metal drills made of high-performance high-speed steel (HSS). Carbide or stainless steel: Metal drill bit with titanium coating or cobalt alloy.2. Centre punching: Mark the position of the hole with a scriber. Position a hardened centre punch and mark the centre of the hole with a short hammer blow - so the drill cannot slip off. For HSS drills with a split point, the centre punching can be omitted. For larger hole diameters pre-drill with a smaller drill bit.3. Speed: To protect the drill bit, drill hard metal at low speed and with low pressure. For softer metals, use a higher speed. Reduce pressure before breakthrough.4. Cooling: Cool drill bit. In the case of long holes, lift out the drill several times and add coolant; take breaks during drilling, as necessary.Serienausstattung
- Schnellspannbohrfutter B 16, 1 - 16 mm- Kegeldorn MK 2 / B 16- Austreibkeil- Werkzeugsatz- Bedienungsanleitung / CE